07-19-2007 10:37 AM - edited 03-14-2019 10:40 PM
what is the difference between these two IOS images? My CME came with SP SERVICES, but to upgrade to CME 4, my Admin Guide is telling me to use an IP VOICE image.
IP VOICE vs SP SERVICES
Solved! Go to Solution.
07-19-2007 11:19 AM
ip voice was the old feature set naming convention. Sp services is the equivalent of ip voice with the ISRs. Look at this IOS chart.
HTH
Sankar
PS: please remember to rate posts!
07-19-2007 11:19 AM
07-19-2007 11:41 AM
your are a wealth of info. Thanks so much. Cisco online documentation can sometimes be difficult to filter.
07-19-2007 12:06 PM
Hi Shanky,
the thing is that "sp services" and "ip voice" are still two separate images for download in 12.4XJ for ISR.
07-19-2007 12:11 PM
Was about to post here about the same. Paolo is right. sp services adds mpls, voatm etc on top of ip voice.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide