IPMA feature ip-phones supported ?

[philipppe cuvillier]

Hi all,

Which NEW phone support the IPMA feature ?

It works with 7940 and 7960 but the customer does not want those models.

Regards

Philippe

[Rob Huffman]

Hi Philippe,

Here we go

Cisco Unified Communications Manager Assistant Station

• Cisco Unified IP Phone 7940G, 7941G, 7941G-GE, 7942G, 7945G, 7960G, 7961G, 7961G-GE, 7962G, 7965G, 7970G, 7971G-GE, or 7975G model supporting Skinny Call Control Protocol (SCCP)

• Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7945G, 7961G, 7961G-GE, 7962G, 7965G, 7970G, 7971G-GE, or 7975G model supporting SIP

Manager Station

• Cisco Unified IP Phone 7940G, 7941G, 7941G-GE, 7942G, 7945G, 7960G, 7961G, 7961G-GE, 7962G, 7965G, 7970G, 7971G-GE, or 7975G model supporting SCCP

• Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7945G, 7961G, 7961G-GE, 7962G, 7965G, 7970G, 7971G-GE, or 7975G model supporting SIP

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps5015/data_sheet_c78-490584.html

Cheers!

Rob

[philipppe cuvillier]

Hi,

Thanks a lot

I was expecting to read 9951 or any other new phones ...

Bad Luck

Philippe

[Rob Huffman]

Sorry Philippe,

Not even in CUCM 8.5(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsipmasl.html#wpxref25292

Cheers!

Rob

[johnsmith9883]

Hello there,

Late reply again, I am trying to raise awarness for alternative solutions.

Even if this is not native, there is a third party application IPSMA (IPS Manager Assistant) that is compatible with the unsupported models (8951, 9951,9971) and does the same and more as IPMA.

You can check it out here: http://www.telisca.com/?page_id=218〈=en

Disclosure: I work for telisca the company who developped it, so I know it's good ;-)

Hope this helps

Kind regards