07-22-2011 02:02 PM - edited 03-16-2019 06:05 AM
I'm trying to set the IP address of a gatekeeper on a 2811 router using IOS15.1 and IPv6. Specifcally the "RAS address". I have turned on the port 1719 for registration (server registration-port 1719) but the gatekeeper can't register anything becasue the RAS address seems to expect a ipv4 address.
The gatekeeper command:
zone local
RASaddr
doesn't support ipv6.
With all interfaces set to IPv6 addresses only, the "sho gatekeeper zone status" indicates my registration port is pointed to the address 0.0.0.0.
In ipv4, setting up gatekeeper was easy and it came up and registered without any fine tuning. Port 1719 came up listening automatically.
What is the command to configure the Gatekeeper RAS address for accepting GateKeeper Registration Requests in IPv6?
Thanks,
Rob
Solved! Go to Solution.
07-26-2011 10:50 PM
Hi Rob
the ipV6 support was not with gatekeeper, or other H323 device yet.
Rgds/Randy
07-26-2011 10:50 PM
Hi Rob
the ipV6 support was not with gatekeeper, or other H323 device yet.
Rgds/Randy
07-27-2011 08:45 AM
Randy! Thanks very much for the response and help.
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide