03-19-2014 03:30 AM - edited 03-16-2019 10:10 PM
Hi
We have a 2921 ISR G2 Router with 6 E1 Cards and Total number of 56 Dial-Peers active on it and 512 MB of Ram.
The IOS Version is 15.2(4)M4 and there’s a PVDM3-256 installed on it. Some days ago the router reloaded accidentally at the end of the work hours. After further lookups we came up with these Information:
Max Memory Usage at the time of Incident: 230MB
Max Total Concurrent Calls active on the Router at the time of reload: 14 Calls
The following is the the last events occurred in the time of crash:
Mar 18 16:37:34.109: %ISDN-4-ISDN_UNEXPECTED_EVENT: Possible ccb run away: Occurred at ../isdn/ccpri.c:4680
Mar 18 16:46:36.681: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:9, changed state to up
Mar 18 16:46:46.681: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:11, changed state to up
Mar 18 18:08:18.041: %ISDN-4-ISDN_UNEXPECTED_EVENT: Possible ccb run away: Occurred at ../isdn/ccpri.c:4680
Mar 18 18:08:33.033: %ISDN-4-ISDN_UNEXPECTED_EVENT: Possible ccb run away: Occurred at ../isdn/ccpri.c:4680
Mar 18 18:40:13.741: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:12, changed state to up
Mar 18 18:50:59.474: -Traceback= 30C2FB30z 30BE48F4z 30BC8FA8z 30BC98ACz 30BCEFA4z 30BD05B8z 30BD15F0z 30BE41E4z 30BB3F20z 30BB3EF4z
Mar 18 18:50:59.474: %ISDN-6-NO_TIMER: No Free Timer Entry, caller 0x30BD7720, timers used 89259
Mar 18 18:50:59.474: %ISDN-1-NOMEMORY: no memory for L3_Init_NLCB: Timer block failure
Mar 18 18:50:59.474: %ISDN-1-NOMEMORY: no memory for L3_GetNew_NLCB: couldn't allocate memory
Mar 18 18:50:59.478: -Traceback= 30C2FB30z 30BE56C8z 30BCFCB0z 30BD06FCz 30BD15F0z 30BE41E4z 30BB3F20z 30BB3EF4z
Mar 18 18:51:03.418: -Traceback= 30C2FB30z 30BE56C8z 30623C7Cz 3062CE94z 30634EF8z 30625BE0z 30BB2548z 30BB3F20z 30BB3EF4z
Mar 18 18:51:03.418: -Traceback= 30623C9Cz 3062CE94z 30634EF8z 30625BE0z 30BB2548z 30BB3F20z 30BB3EF4z
Mar 18 18:51:03.418: %ISDN-2-ISDN_FATAL: ISDN FATAL ERROR: file CCPRI, function CCPRI_Mail, message: LIF_SendPkt returned failure: 25
Mar 18 18:51:03.418: %ISDN-2-ISDN_EXIT: LIF_SendPkt returned failure: 25
%Software-forced reload
18:51:03 UTC Tue Mar 18 2014: Breakpoint exception, CPU signal 23, PC = 0x30E022A4
Has anyone faced the same problem before?!!!
Any Help would be appreciated J
03-20-2014 01:27 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide