cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
709
Views
2
Helpful
1
Replies

ISR 4331 Voice Gateway configuration

gary391
Level 1
Level 1

Hi Team, 

I am new to the Cisco domain. I have been tasked with investigating and configuring an ISR4331 as a voice gateway. We are currently using AudioCodes Voice Gateways and want to include Cisco ISR 4331 as a voice gateway option in our fleet.

I have a few basic questions to get started.

1. Does ISR4331 support PRI and SIP trunk integration?

2. I have Cisco 3845 as a voice gateway (PRI); can I use its configuration on ISR4331?

3. Can someone suggest a good configuration doc., that can help me get started on my project?

Thanks & Regards,

 

 

1 Accepted Solution

Accepted Solutions

1. Yes
2. More or less you can use the same configuration. There can be some differences between the two platforms, but you should be able to figure it out by looking for any error(s) you get.
3. Look at this document. Cisco Unified Border Element Configuration Guide Through Cisco IOS XE 17.5 



Response Signature


View solution in original post

1 Reply 1

1. Yes
2. More or less you can use the same configuration. There can be some differences between the two platforms, but you should be able to figure it out by looking for any error(s) you get.
3. Look at this document. Cisco Unified Border Element Configuration Guide Through Cisco IOS XE 17.5 



Response Signature