cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
827
Views
0
Helpful
2
Replies

Issues registering 9971 with CM8

nbourke2000
Level 1
Level 1

I'm new to callmanager, just getting my head around things. I have a CM 8 set up in a VM and two 9971s. My objective is to get the phones up and registered and make a video call between the two. I switched on auto registration and the phones aren't coming up. Status on phone shows TFTP TImeout.

I've tried static config of the phone in CM before i tried auto-registration, didn't work then either

I've tried both on Voice VLAN configured ports and on a flat network

I have no DNS on the network and so i changed the server name to the IP of the server

i've set option 66 & 150 on DHCP to the IP of the CM

SIP as default for auto-registration

Auto-reg not disabled in CM config

Extensions range defined

I can't figure out what i'm doing wrong.

1 Accepted Solution

Accepted Solutions

asandborgh
Level 4
Level 4

Hi,

Is the Callmanager and other appropriate services running?  If not see CUCM Servicability....

HTH,

Art

View solution in original post

2 Replies 2

asandborgh
Level 4
Level 4

Hi,

Is the Callmanager and other appropriate services running?  If not see CUCM Servicability....

HTH,

Art

nbourke2000
Level 1
Level 1

Issue resolved by TAC replacing faulty phone.