Jabber Client - How to make the SIP URI be the default for "green button" click to dial

[bvanbenschoten]

IMP 12.0 on-prem with Jabber for Windows 12.0 (But I think this would apply to most all current releases of IMP/Jabber)

Using only UDS directory with LDAP sync on back end.  LDAP directory is mapping telephoneNumber to Phone Number and mail to Directory URI

The client seems to default to using the Phone Number as the default selection for the green click to dial function.  I have a need to make this default to the SIP URI.

I've checked over the parameters available here

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_0/cjab_b_parameters-reference-guide-for-cisco_12.html

but not finding anything in the XML parameters that would seem to influence this.

See screen capture attached here for a visual.

[Jaime Valencia]

Not AFAIK, that's the same behavior if you use LDAP as directory source. As the DN and URI should be associated in CUCM, that should not make a difference.

[aneesap90]

Hi,

Anyway to remove this SIP URI from jabber client

thanks