07-26-2019 07:08 AM
Hello, i'm trying to test the new Jabber functionality which was released with 12.5 back to CME.
According to this document this should work fine:
Unfortnunatelly if you follow the guide it does not work.
If you open the client and choose Cisco Cummunications Manager 9 and set the server ip it can't login no matter the username / password combination is use.
If you copy it from the guide it can't work because Jabber requests at least on @ in the username.
I have read a couple of time about a phone-only mode and i have found some older documentation where you can install it from CMD with specific parameters but that does not seems to work with 12.X
Anyone got this working and has some tips for me ?
Solved! Go to Solution.
07-26-2019 07:40 AM
Try the user you configured @ CME IP
You can also look at the PRT
The CME IOS compatibility notes do not show any Jabber version as supported, and docs don't explain how the configuration file or contact source would be configured.
I would start by looking at the PRT, and then discuss with your SE if he can find more details about this.
07-26-2019 07:40 AM
Try the user you configured @ CME IP
You can also look at the PRT
The CME IOS compatibility notes do not show any Jabber version as supported, and docs don't explain how the configuration file or contact source would be configured.
I would start by looking at the PRT, and then discuss with your SE if he can find more details about this.
07-29-2019 01:41 AM
Thanks yeah you are right i saw Jabber is not listed anywhere i will wait a couple of versions maybe the docmentation is finished then too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide