cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
411
Views
0
Helpful
1
Replies

Jabber/LDAP using iPhone Error

Hi,

I'm trying to connect an Apple iPhone(OS 6) to Microsoft 2008 Active directory, but I'm getting the below error when I enter the username and password.

  • Credentials required or incorrect search base

When I exported the logs from android, I see that It connects to AD succefully for a second:

-- 2014-01-02 13:08:53.045 DEBUG [3b7f918c] - [UMCAccountViewController _initAccount:<UMCDirectoryAccount>:  X.X.X.X:389  isNewAccount:1

- 2014-01-02 13:10:46.229 DEBUG [82c1000] - -[CSILDAPQueryOperation performOperation]

-- 2014-01-02 13:10:46.233 DEBUG [3b7f918c] - Connected to an ActiveDirectory LDAP server

-- 2014-01-02 13:10:46.233 INFO [3b7f918c] - Naming Context found: DC=example,DC=com

       --[CSILDAPPersonDataSource ldapConnectionQueryDidComplete:]

After that everything goes downhill after that:

-- 2014-01-02 13:10:46.240 DEBUG [3b7f918c] - -[UMCAddressBook dataSourceDidFailConnect:]

-- 2014-01-02 13:10:46.241 INFO [3b7f918c] - [UMCAccountViewController account:didFailVerificationWithError] Error: Credentials required or incorrect search base

-- 2014-01-02 13:10:46.250 DEBUG [3b7f918c] - [UMCDirectoryAccount setConnectionStatus]: Disconnected

-- 2014-01-02 13:10:46.250 DEBUG [3b7f918c] - -[CSILDAPPersonDataSource stopDataSource]

-- 2014-01-02 13:10:46.251 DEBUG [3b7f918c] - -[CSILDAPDirectory unbind]

-- 2014-01-02 13:10:46.252 DEBUG [3b7f918c] - CSILDAPDirectory addOperation: CSILDAPUnbindOperation

-- 2014-01-02 13:10:46.252 DEBUG [3b7f918c] - CSILDAPDirectory addOperation: CSILDAPUnbindOperation

-- 2014-01-02 13:10:46.254 DEBUG [3b7f918c] - [UMCAccountManager connectionStatusDidChange]: new otherServices is 2

-- 2014-01-02 13:10:46.254 DEBUG [82c1000] - [CSILDAPUnbindOperation performOperation] Unbinding self.directory (<CSILDAPDirectory: 0x6a509d0>)


I have used the same IP and port for android phones and they connect seemlesly. I have used  port 3268 and 3269 both didnt work. This is my current settings:

ldap-cucm.JPG

1 Reply 1

Hi Zekeria.

Give a look to this DOC if it can be useful

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080bbcd05.shtml

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"