12-07-2021 08:11 PM
Hi All
So i have question about licensing for set-up secure communicate connection between CUCM v.12.5 with ISR 4331.
I don't sure if we need to use SIPS (port 5061) Secure Session Initiation Protocol gateway and Intercluster Trunk, We must have a licensing or not?
If it should have please let's me know keyword license for talking with pre-sale team
Regards.
Tom
Solved! Go to Solution.
12-09-2021 07:15 AM
Read the whole line that mentions that, not just that snip:
CUCM doesn't need any licenses GWs, trunks, or anything similar, if anything, you need to be enable the export controlled functionality when generating the token as you would want to use TLS and that is required.
On top of that, if you will actually use it as a CUBE, you would also required CUBE licenses.
I would strongly recommend you work with a local Cisco partner WITH UC specializations to understand what you would need to order for this.
12-08-2021 06:08 AM
No, the GWs and trunks are not licensed in CUCM.
12-08-2021 11:31 PM
Dear Jaime
So,We're confuse your replay with more detail in link below
We should have security and Unified Communication K9 (UCK9) licenses or not ?
Regards,
Tom
12-09-2021 07:15 AM
Read the whole line that mentions that, not just that snip:
CUCM doesn't need any licenses GWs, trunks, or anything similar, if anything, you need to be enable the export controlled functionality when generating the token as you would want to use TLS and that is required.
On top of that, if you will actually use it as a CUBE, you would also required CUBE licenses.
I would strongly recommend you work with a local Cisco partner WITH UC specializations to understand what you would need to order for this.
12-12-2021 08:04 PM
Dear Jaime
Thank you for answer and suggestion.
Regards,
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide