Limit Call Duration on CME‏

ievalleyccie · ‎10-23-2012

I wonder if there is a way to configure call manager to disconnect a

call after let's say 10 minutes. I have searched the entire CallManager

administrator guide, but could not find any such option. The goal is to

limit certain users/numbers to a maximum time they can call...

Thanks for your help in advance

Jaime Valencia · ‎10-23-2012

You mention CUCM and CME, neither of them can do it. You would need to do TCL scripting

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Aditya Gupta · ‎10-23-2012

Maybe you want to check this parameter on CUCM "Maximum Call Duration Timer "

This can be found under CUCM Admin page: System--> Service Parameter -->Cisco Call Manager.

Jaime Valencia · ‎10-23-2012

That's a global parameter and will affect ALL calls

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Robert Thomas · ‎10-23-2012

For CME I'm not aware of the parameter, and CUCM would only contain the parameter Aditya mentioned and that would affect all calls on the system. It's usually set to a large value like 14 hours, in case a calls stays up due to an unknown reason for a very long time.