Mapping Outbound Calls to Unique FXS/FXO Ports

[ayyoubira]

hi

I need a sample configuration for Mapping Outbound Calls to Unique FXS/FXO Ports 

[Jitender Bhandari · Accepted solution]

Hi,

this would answer your question.

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/41887-specific-fxs-call.html

HTH

JB

Please rate helpful posts.

[ayyoubira]

thanks for de help

[Jitender Bhandari]

Hi,

you can mark the post as answered if you dont have further questions.

JB

[Nadeem Ahmed]

 You need to create dial-peer with destination pattern of number you need to match for outbound calls and associate respective port number of FXO line

example

dial-peer voice 10 pots

destination-pattern 94087847430 (destination pattern can be common or number pattern which is going to match this dial-peer)

port x/y/z

FXS generally used analog phone line again you have to create a dial-peer with pots x and associate FXS port number for receiving call.

Br,

nadeem