cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1009
Views
0
Helpful
0
Replies

%MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1

mdrangell22
Level 1
Level 1

Hello Guys

 

I am having this issue with CPA E1 R2 where the Controller falls down and lifts up many times a day. I already changed the framing without change status and my provider said that everything is fine with their devices.

 

As we have two gateways I changed the connection to the other Gateway and there is still the issue. I also have 20 Path Violations , 2 Errored Secs, 2 Bursty Err Secs and 350 Unavail Secs for the last 24 Hours, I think this counters are really low for the amount of times the CPA falls down and lifts up but do you guy think that this could be a problem Layer 1 and I must have to change the cisco cable that connect the gateway with the provider's device? Or any other idea what could happen?

 

 


833240: *Oct 27 12:36:18.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833241: *Oct 27 12:36:19.523: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833242: *Oct 27 12:36:21.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833243: *Oct 27 12:38:30.523: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)
833244: *Oct 27 12:38:30.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833245: *Oct 27 12:38:31.523: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833246: *Oct 27 12:38:33.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833247: *Oct 27 12:51:22.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)
833248: *Oct 27 12:51:22.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833249: *Oct 27 12:51:23.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833250: *Oct 27 12:51:25.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833251: *Oct 27 12:51:29.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)
833252: *Oct 27 12:51:29.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833253: *Oct 27 12:51:31.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833254: *Oct 27 12:51:33.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833255: *Oct 27 12:52:10.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)
833256: *Oct 27 12:52:10.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833257: *Oct 27 12:52:11.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833258: *Oct 27 12:52:13.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833259: *Oct 27 12:52:22.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)
833260: *Oct 27 12:52:22.707: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/1/0
833261: *Oct 27 12:52:23.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to up
833262: *Oct 27 12:52:25.959: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/1/0
833263: *Oct 27 12:54:36.519: %CONTROLLER-5-UPDOWN: Controller E1 0/1/0, changed state to down (RAI detected)


0 Replies 0