10-04-2013 06:59 AM - edited 03-16-2019 07:42 PM
Hi, I'm having this issue: I dial a meet me number to set up a conference and let users join during a time lapse, but after exactly one hour (of inactivity) the meet me drops. This happens every time I set up a meet me conf. Is there some kind of time limit on CME or any ideas?
Sent from Cisco Technical Support iPad App
10-04-2013 07:32 AM
Hi Carlos
No, MeetMe under CME (or under CUCM) doesn't have any timer.
When the Meetme call drops, is it for both internal and external callers, or just for external? I have seen an issue on SIP trunks where the call is torn down after 60 minutes due to reinvite timers. For internal callers MeetMe stayed up, however the external calls got torn down.
HTH.
10-04-2013 07:39 AM
Hi, this is the scenario: I dial internally four digit meet me number at 6pm to set up a conference... If nobody has joined within an hour, the call (meet me) drops suddenly at 7pm.
Sent from Cisco Technical Support iPad App
10-04-2013 08:01 AM
Hi
Please check the below link , i think will help you
https://supportforums.cisco.com/thread/321831
Thank you
please rate all useful information
10-04-2013 08:04 AM
Hi, this issue happens on CME not CUCM...
10-04-2013 08:10 AM
Hello
can you share with the Conference of meetme configuration which you configured on your CME and how can you associate this under telephony-service?.
Thank you
please rate all useful infomration
10-04-2013 08:29 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide