MeetMe Conference - No Conference Bridge

[zshakeel]

Hi:

Would appreciate any pointers in resolving a MeetMe conferencing issue. Pressing the MeetMe button shows No Conference Bridge message. Following is the checklist:

1. The dspfarm profile 1 conference is not shut.

2. "show dspfarm all" shows the conferencing service is UP, ACTIVE and ASSOCIATED

3. Image is ipvoice_ivs-mz.124-24.T4 and CME is 7.1

4. sccp ccm line is pointing to version 7.0

5. telephone-service has the appropriate sdspfarm tags

6. ephone-template has the "conference admin" statement

Anything else I can check ?

Thanks for any suggestions.

[nitsinha]

Hi,

Do you have conference meetme command under all the ephone-dn's which are supposed to join the conference? Also check for the conference hardware under the telephony service.

Have a look at the following thread. It  may be of some help to you

https://supportforums.cisco.com/message/1123356

Hope that helps

Regards

Nitesh

PS: Pl rate helpful posts

[nitsinha]

Check this config doc as well

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1020601

HTH

Regards

Nitesh

PS:Rate helpful posts