MGCP on 3640 router

[pminguy]

I want to configure a 3640 router to act as FXS ans PRI gateway. I had found how to configure ccm 4.2 but what configuration i have to put in the router ???

[Nicholas Matthews]

I think you'll find this helpful:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b31.shtml

hth,

nick

[Jaime Valencia]

there is plenty of documentation on the matter if you take 5 minutes and search CCO

How to Configure MGCP with Digital PRI and Cisco CallManager

http://www.cisco.com/en/US/partner/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml

Configuring the Cisco IOS MGCP Gateway

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a008017787b.shtml

Configure MGCP Gateway and FXO/FXS Ports on a Cisco CallManager Server

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a008017825e.shtml

HTH

java

if this helps, please rate

[pminguy]

thanks but the links are forbidden i can't reach them

[Jaime Valencia]

use your CCO to log in or remove partner/ from url and try again