07-04-2013 10:25 AM - edited 03-16-2019 06:13 PM
Hello All,
when someone i check my missed calls on my cisco IP phone, they are showing up as a voicemial port number and not as the number the person called from.
can someone advise as to what may cause this.
i have a CUCMBE 5000 system.
Solved! Go to Solution.
07-04-2013 10:39 AM
Hi Surendra,
Have you tried playing with this setting?
CallManager System Parameter:
Clusterwide Parameters (Device - Phone)
Display Original Calling Number on Transfer from Cisco Unity = True
Cheers!
Rob
"I don't know how, I don't know when
But you and I will meet again "
- Tom Petty
07-04-2013 10:39 AM
Hi Surendra,
Have you tried playing with this setting?
CallManager System Parameter:
Clusterwide Parameters (Device - Phone)
Display Original Calling Number on Transfer from Cisco Unity = True
Cheers!
Rob
"I don't know how, I don't know when
But you and I will meet again "
- Tom Petty
07-04-2013 06:33 PM
Nice one Rob! +5
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
07-08-2013 08:23 AM
Hi Rob,
right on target!!! thanks alot...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide