Greetings Everyone,
I have a client who is running a UC520 with 4 FXO ports. Unfortunatly I need to configure one of them and it appears to not br registering. I am running a fax machine off of the port and with a butt-set attached I can make out bound calls but inbound gives a busy. My questions is how do I register the port. Originally the port didnt even have a MAC or ephone configuration. Please see the info below.
ephone-53 Mac:EF79.0CA4.0001 TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.1.10.2 12423 SCCP Gateway (AN) keepalive 88 max_line 1
port 0/0/1
button 1: dn 52 number 297 CH1 IDLE
UC520#show stcapp device summary
Total Devices: 2
Total Calls in Progress: 0
Total Call Legs in Use: 0
Port Device Device Call Dev Directory Dev
Identifier Name State State Type Number Cntl
---------- --------------- -------- ------------- ------- ----------- ----
0/0/2 AN1EF790CA40002 IS IDLE ALG 236 CME
0/0/3 AN1EF790CA40003 IS IDLE ALG 226 CME
Any assistance would be appriciated.
Cheers