07-28-2015 11:12 PM - edited 03-18-2019 11:35 AM
Dear folks,
I am using CUCM 9.1.2. Apart from meet me feature is there any other way I can setup a bridge kind of call.
My requirment I wanted to create a bridge number and when user who are internal,as well as PSTN callers will dial the number will be prompoted for an authentication.is it possible? if yes kindly share a guide to achive the same. As far as I know in meet me we do not have such facility.
Or do we have to go for aditional solutions? like unity or webex for this kind of an audio bridge?
Ajith--
Solved! Go to Solution.
07-28-2015 11:36 PM
Using CUC;
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118722-configure-cucm-00.html
Other options;
http://x-ccie.blogspot.in/2015/04/4-ways-to-protect-cucm-meetme.html
Thanks
Vivek
07-28-2015 11:25 PM
Hi Ajith,
You're right. There is no authentication mechanism for meet-me conference in standalone CUCM.
https://supportforums.cisco.com/discussion/12031951/meetme-pattern#4115333
https://supportforums.cisco.com/discussion/12003841/meetme-conference-through-pstn
Thanks
Vivek
07-28-2015 11:29 PM
So what would be a work arround to achive the same? unity ? for an IVR prompt? or any third party solution?
07-28-2015 11:36 PM
Using CUC;
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118722-configure-cucm-00.html
Other options;
http://x-ccie.blogspot.in/2015/04/4-ways-to-protect-cucm-meetme.html
Thanks
Vivek
07-28-2015 11:55 PM
Thanks vivek.. !!
07-28-2015 11:57 PM
You're most welcome!
Thanks
Vivek
07-29-2015 07:57 AM
There is now, on CUCM 11
07-29-2015 08:02 AM
Gr8 to know Jaime.... One of the most demanding feature is now available.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide