Multiparty conference ( bridge conf setup in CUCM )

[Ajith Nayak]

Dear folks,

I am using CUCM 9.1.2. Apart from meet me feature is there any other way I can setup a bridge kind of call.

My requirment I wanted to create a bridge number and when user who are internal,as well as PSTN callers will dial the number will be prompoted for an authentication.is it possible? if yes kindly share a guide to achive the same. As far as I know in meet me we do not have such facility.

Or do we have to go for aditional solutions? like unity or webex for this kind of an audio bridge?

Ajith--

[Vivek Batra]

Hi Ajith,

You're right. There is no authentication mechanism for meet-me conference in standalone CUCM. 

https://supportforums.cisco.com/discussion/12031951/meetme-pattern#4115333

https://supportforums.cisco.com/discussion/12003841/meetme-conference-through-pstn

Thanks

Vivek

[Ajith Nayak]

So what would be a work arround to achive the same? unity ? for an IVR prompt? or any third party solution?

[Vivek Batra · Accepted solution]

Using CUC;

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118722-configure-cucm-00.html

Other options;

http://x-ccie.blogspot.in/2015/04/4-ways-to-protect-cucm-meetme.html

Thanks

Vivek

[Ajith Nayak]

Thanks vivek.. !!

[Vivek Batra]

You're most welcome!

Thanks

Vivek

[Jaime Valencia]

There is now, on CUCM 11

[Vivek Batra]

Gr8 to know Jaime.... One of the most demanding feature is now available.