06-07-2012 01:06 AM - edited 03-16-2019 11:32 AM
Hello,
I try to settup MVA (Mobile Voice Access) with hairpinning on a CUCM 8.6.
When I dial, I got the women saying "Welcome on Cisco Unified Communication Manager ......" --> OK
But the problem comes when I dial my remote destination, example:
- I would like to dial 00798542635
- it dials 0000779988554422663355
I don't understand what happens.
I join log file comming from the gateway with command "debug voip application digitcollect".
In the log file, I tried to dial "005" and I had "000055".
Please help me.
Solved! Go to Solution.
06-07-2012 06:07 AM
Hi,
Are you using an MGCP gateway ?
If so can you add the following line of config.
mgcp dtmf-relay voip codec all mode out-of-band
save config and reset gateway.
retest
Regards,
Alex.
Please rate useful posts.
06-07-2012 06:07 AM
Hi,
Are you using an MGCP gateway ?
If so can you add the following line of config.
mgcp dtmf-relay voip codec all mode out-of-band
save config and reset gateway.
retest
Regards,
Alex.
Please rate useful posts.
06-08-2012 04:47 AM
Thanks a lot for your fast help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide