IP Telephony and Phones

haymy costumer have bussines edition ver 7.5  with informacast ver 7.1when i press the paging button that i configure, all the phone that add to the recaption group r paging fineall the 7970 model phone ( ver 9.2.3) cant be page for some reasonany id...

Hi colleagues .... There is the possibility of changing the busy trigger setting which by default is 2 for only one? only need to do to all phones, is there any script for this change?

Hi,We have a Call manager express version 7 and want to do call recording. My concern is that by spaning the voice vlan we will get the RTP information but not the CTI information about the call.How do I go about doing this on Call Manager express?Th...

Hi dear community,One of my client wants to configure VG200 (224) series in CUCM (8.6) via Kurmi.He asked me how was calculated the address mac ports of the VG. After send him the official answer of Cisco (that is on the online help of the cucm), I f...

Hi,I need to find the correct pin out pattern for connecting a HWIC-CE1T1-PRI on a Cisco 3845 router to an Alcatel PBX.   Can anyone advise about this?Thanks in advance,Gareth Batley.               

Hi All,good morning,hope all of you doing well.I have a problem with my CUCM 7.1 and Cisco 9971 IP Phone.IP Phone 9971 have International Calling Priviliage with FAC ( Forced Authentication Code ) Enabled .When Dial Number  9. 001 123- 456- 789 , and...

Guys, hope you can help.I have a 3com NBX 100 connected to a 2811 using QSIG. I have most things working. Calls between the 3com and CUCM are fine. The DN shows up on both phones. However neither system show the calling name on the phones. I am not s...

Dear ALLOur customer deployed 2 unity connection server on their uc architecture , 2 function enabled on CUC system (AA and voice mail ) today the RMTM alerting the cuc puslisher has gone down , but the subscriber server running normally and found a ...

Hi,I have a setup of two sites as follows:                                     |||| SITE A ||||                                                                                               |||| SITE B ||||legacy pabx(ericcson --------cisco 2911 ----...

Hello--i'm trying to figure out an equivilent to a CTI route point for CME.  I've got a client who has their existing PBX interconnected across a MAN to a CME system at a remote site, and in order to route calls to a particular number, i need the fun...

Hi all,I have 3 CUCM server in a cluster running version 5.1.3.8000-4 and i've already bought 3 new MCS server for replacing old servers. It is not possible to upgrade the old server to version 7.1(3b) because i don't have Software Feature license. T...

Hi,  I have CCM & Unity 4.x server. Last Sunday powered down the servers and powered ON after maintanence. Post to that, when I dial the number the I should get the Welcome Message, instead it just keeps ringing. When I dial the DID #, calls are land...

Is there a way, either by gui or cli, to send messages from the cucm server to phones?If so, is it a blast message or individual phones/groups?thanks!Ven                

Hello everyone,I have been having trouble trying to get SIP Trunk authentication to work.Im trying to use this as a way of monitoring which trunks are up and down with the end-state and possibly in the future, to be able to display this graphically (...