03-18-2021 08:55 AM
Hi everyone.
I have a problem: my SIP phone (3rd party) coudn't receive calls. It can make calls, bat I can't hear the other side.
voice register dn 6 number 7275 allow watch name 7275 label TF4 7275 mwi ! voice register pool 69 busy-trigger-per-button 2 id mac 000B.000B.000B number 1 dn 6 dtmf-relay rtp-nte sip-notify username 7275 password 0069x0000009999 description GXP 2000 SJC codec g711ulaw
CME_3945#sh voice register pool 69 Pool Tag 69 Config: Mac address is 000B.000B.000B Number list 1 : DN 6 Proxy Ip address is 0.0.0.0 Current Phone load version is Grandstream GXP2000 1.2.5.3 Class of Restriction List Tag: default Incoming corlist name is PERFIL-5 DTMF Relay is enabled, rtp-nte, sip-notify Call Waiting is enabled DnD is disabled Video is disabled Camera is disabled Busy trigger per button value is 2 Description is GXP 2000 SJC keep-conference is enabled registration expires timer max is 3600 and min is 60 username 7275 password 0069x0000009999 Lpcor Type is local Lpcor Incoming is PSTNTrunk Lpcor Outgoing is Transport type is udp service-control mechanism is not supported registration Call ID is 1425b1bdf56d7bcf@10.132.8.45 Registration method: per line Privacy feature is not configured. Privacy button is disabled active primary line is: 7275 contact IP address: 10.132.8.100 port 5060 conference admin: no conference add mode: all conference drop mode: never paging-dn: config 0 [multicast] effective 0 [multicast] Dialpeers created: Dial-peers for Pool 69: dial-peer voice 40080 voip corlist incoming PERFIL-5 destination-pattern 7275$ session target ipv4:10.132.8.100:5060 session protocol sipv2 dtmf-relay rtp-nte sip-notify codec g711ulaw bytes 160 after-hours-exempt FALSE
The phone IP address is 10.132.8.45. But the created dial-peer to this extension (7275) point to 10.132.8.100.
CME_3945#sh dial-peer voice sum | i 7275 40080 voip up up 7275$ 0 syst ipv4:10.132.8.100:50
So, the calls to extension 7275 are forward to wrong IP 10.132.8.100. I can confirm this by debugging ip packet.
Can somebody help me, please?
Solved! Go to Solution.
03-23-2021 10:16 AM
Glad that you could solve the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide