Need assistance routing inbound calls from a SIP trunk to different extensions in different partitions

[John Platts]

I already have the CUCM system installed, and I have already added the SIP trunk. I need assistance routing different numbers coming in over this SIP trunk to different partitions.

Here is a list of patterns coming into the SIP trunk, along with the partitions that these calls need to be routed to:

19722320XXX -> Extensions 2XXX in Partition_A

1972874XXXX -> Extensions XXXX in Partition_B

168222763XX -> Extensions 40XX in Partition_C

19722081000 -> Extension 2000 in Partition_A

19725383191 -> Extension 3000 in Partition_B

18175723897 -> Extension 4000 in Partition_C

How do I configure CUCM 10 to route these numbers coming in to the appropriate partitions? All of the above patterns are coming in over the same SIP trunk, but I need help getting these numbers routed correctly to their proper destinations.

[Jaime Valencia · Accepted solution]

Configure the translation patterns to do that routing, that's all you need.

Turn that data you posted, into TPs.