cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

742
Views
0
Helpful
3
Replies
drosenbaum
Beginner

need help configuring a sip phone (polycom ip310)

I run cucm 7.0 and run a 100 or  so  sscp 7941's, as a test i need to configure one sip extension.

thank you

Dave

3 REPLIES 3
vpreenja
Beginner

Either convert the existing sccp phone to Sip through BAT using the option - Migrating sccp to sip. Or configure the service parameter - Auto registeration protocol to be SIP and let the new 7941 sccp phone to auto register.

My question was I have new polycomm phone it needs to be configured as a sip extension as a test, the rest of my phones are 7942 sccp phones

Dave,

This is a little bit more complictaed than it seems and requires quite a bit of "tweaking". Look into the following link and try it out. Let me know if it works.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b09sip3p.html#wpmkr1010498

Regards,

Naveen

Content for Community-Ad