01-06-2012 11:35 AM - edited 03-16-2019 08:51 AM
I'm trying to setup an LDAP integration with CUCM 7.0.1 in a lab environment. Can I make the Exchange [2003] server the LDAP server as well? If so, how is that done? Or, do I need to build a separate LDAP server? If so, how is that done? Thanks
Solved! Go to Solution.
01-06-2012 02:01 PM
OK
So OU=Users should be CN=Users
It's a built-in 'Container' rather than an OU.
I wouldn't normally put extra spaces in but don't think that matters (after commas etc).
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
01-06-2012 11:50 AM
For a lab environment that works just fine, I have one server working as AD/DC/Exchange for the 10-20 users I have.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-06-2012 12:08 PM
Thanks. I'm having trouble with the integration. Is there something on the Exchange side I have to configure?
01-06-2012 12:10 PM
No, just configure the ldap system under CUCM, there's no difference in having Exchange in the server or not from a config point of view.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-06-2012 12:48 PM
I referenced this website in the past when setting up an LDAP integration.
01-06-2012 01:22 PM
Hi
Perhaps describe the actual problem you are experiencing so we can offer further assistance.
Principal Engineer at Logicalis UK
Please rate helpful posts...
01-06-2012 01:38 PM
I'm getting a "login failure to host ldap://192.168.1.63:389 Please reenter LDAP Manager Distingished Name and Password."
I"m using the full canonical name, double checked the password, but keep getting it.
01-06-2012 01:42 PM
OK
Can you screen grab the 'object' tab of the user and the expanded tree in AD Users & Computers that shows where the user is placed in AD?
And post up what CN you are entering.
Aaron
01-06-2012 01:56 PM
01-06-2012 02:01 PM
OK
So OU=Users should be CN=Users
It's a built-in 'Container' rather than an OU.
I wouldn't normally put extra spaces in but don't think that matters (after commas etc).
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
01-06-2012 02:11 PM
You Rock!! That was it. I also had to change the ou to cn for the User Search Base. The database was added successfully and is synching right now. Thanks for your help. Thanks to everyone here.
01-06-2012 02:17 PM
Good stuff... Please remember to rate helpful posts and mark answered if appropriate.
Principal Engineer at Logicalis UK
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: