05-22-2013 11:30 PM - edited 03-16-2019 05:27 PM
Good day,
I am a new Network administrator and do not have allot of experience, so any help would be appreciated thanks.
I am trying to setup a 6921 cisco ip phone on a 2901 router but the phone says "phone not registered"
i did setup the dhcp pool and loaded the telephony service but not to sure if i got the firmware of the phone on the router correct?
ip's has been setup and port has been unshut.
please help thanks.
05-22-2013 11:38 PM
Hi
Please send us the config. Config will help us to find the problem.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
05-28-2013 01:39 AM
Router#sho run
Building configuration...
Current configuration : 1899 bytes
!
! Last configuration change at 08:32:05 UTC Tue May 28 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
no ipv6 cef
ip source-route
ip cef
!
!
!
ip dhcp excluded-address 192.168.13.220 192.168.13.254
!
ip dhcp pool phone
network 192.168.13.0 255.255.255.0
default-router 192.168.13.254
option 150 ip 192.168.13.254
!
!
multilink bundle-name authenticated
!
!
!
!
!
crypto pki token default removal timeout 0
!
!
voice-card 0
!
!
!
!
!
!
!
license udi pid CISCO2901/K9 sn FCZ162620N7
hw-module pvdm 0/1
!
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
ip address 192.168.13.254 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
no ip address
shutdown
no fair-queue
clock rate 2000000
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
voice-port 0/3/0
!
voice-port 0/3/1
!
!
!
mgcp profile default
!
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
max-ephones 24
max-dn 72
ip source-address 192.168.13.254 port 2000
system message test
load 6921 SCCP6921.8-5-3-0.loads*
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
!
!
ephone-dn 1
number 1167
label 1167
description User 1
name user 1
!
!
ephone 1
mac-address 1CE6.C799.362B
max-calls-per-button 2
username "user5" password 12345
type 6921
button 1:1
!
!
!
!
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
!
scheduler allocate 20000 1000
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide