cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
7266
Views
0
Helpful
3
Replies
Highlighted
Enthusiast

No Audio On IP Communicator Over Cisco VPN

I have the Cisco IP Communicator 7.0.5.0 and I'm running Cisco VPN 5.0.04.0300.  I get dial tone and DTMF tones, but no audio on the call.  No audio on either end.  I've tried this from 3 different networks using VPN and it worked on 1 out of 3.  Any ideas where to start trouble shooting?  Thanks!

3 REPLIES 3
Highlighted
Advisor

there are several threads in this forums realted to this..so a quick search might help you find the answer to the problem...

Not sure if this thread helps..but try it...and let us know!!

https://supportforums.cisco.com/message/1077086#1077086

Highlighted

That link did, but didn't help, but I did get it working!

My regular account I logon to the computer with does not have Administrative rights.  I did a RUN AS on IP Communicator and ran it as my administrative account and then I had audio!  Closed down IP Communicator and launched it again with my regular account and I had audio again!  It appears that not having Admin rights when running IP Communicator, it was unable to update the network settings.

Thanks!

Highlighted

good to know!!