02-18-2008 08:23 AM - edited 03-15-2019 08:54 AM
Hi to all,
I have a CCME 4.2 and a Nokia E61 with installed Intellisysnc 1.1, a access point 1200.
I'm trying to configure the E61 to connect as IPphone, on wireless are correct associated (it browes intenet, e-mail etc) the SCCP client is correct configured (it seems... I also configure TFTP manually as CCME ip), but when I try to do a call with "internet telphony" it try to register on CCME but after some minute goes in timeout.
Here the configuration on the ephone on CCME:
telephony-service
load 7960-7940 P00308000500
load 7920 cmterm_7920.4.0-03-02
load 7941 SCCP41.8-2-2SR2S
load 7961 SCCP41.8-2-2SR2S
load 7971 SCCP70.8-2-2SR4S
load 7970 SCCP70.8-2-2SR4S
....
!
ephone-dn 17 dual-line
number 1017
description Nokia E61 Neri
name Nokia E61 Neri
no huntstop
!
...
!
ephone 21
device-security-mode none
mac-address 0013.FD43.61CB
type 7970
button 1:17
!
I'm sure of mac-address becasue I check it on AP and I read it on phone.
CCME can ping E61.
What can I check to verify why e61 does not registering? Any Ideas?
Thank
Augusto
02-18-2008 09:10 AM
OK I already resolved, I restart the procedure of activation of intellisync ICC, that it seem was not correct licensed!
Now works fine.
Augusto.
02-18-2008 10:11 AM
All good...
Beware that using 8.0 the 7940 can go mute at random ... downgrade to 7.2.T023 if it happens.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide