10-24-2013 12:24 PM - edited 03-16-2019 08:03 PM
Hello everybody
I have a IP Telephony deployment with 700 users. I have a branch office with 40 users, which is the Gateway required for this site if I have to cover 50% with SRST. Do I have to use the 2911 which support up to 50 SRST or do I have to use the 2905 which support up to 35 SRST? what happen with the 50% of the users which don't need SRST, do they count in the ISRG2 capacity?
regards
Solved! Go to Solution.
10-24-2013 01:29 PM
Use the one that fits your user base and calculations, users who won't have a SRST reference are not considered, just the ones who will register with SRST.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
10-24-2013 01:29 PM
Use the one that fits your user base and calculations, users who won't have a SRST reference are not considered, just the ones who will register with SRST.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
10-24-2013 05:36 PM
Hi
1-For SRST:
A-Your registered gateway , should be attached to RG "route group".
B-On device pool , assign route group for the router which will be used as SRST.
C-On device pool , SRST select "use default gateway". and do monitor for 30.
All phones which have the DP will be reregister your SRST router , this will be debend on the SRST license on your gateway and (max-dn & max-ephones) which are configured on your gateway.
Thank you
Please rate all useful information
10-24-2013 06:49 PM
Islam (+5)
Cisco Unified Survivable Remote Site Telephony
Compatibility Information
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
HTH
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide