cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
464
Views
10
Helpful
7
Replies
mknwv
Beginner

One BLF Button monitoring two lines

Hello Everyone,

I have a need to configure a Busy Lamp Field on a Cisco 7975G to monitor the status of two DN on another telephone without using the Presence feature. 

Here is the scenario .....

User A has two different DN on their 7975G (neither are shared).  User B has a need to see anytime User A is on either line, but I am restricted to using one button.

Is this possible on CUCM 8.0?

7 REPLIES 7
Chris Deren
Hall of Fame Master

Sorry, cannot be done, only 1 to 1 relationship is available via BLF.

Chris

Just a sidenote, CME can do this. "watch phone".

Paolo,

This is very good information to know (+5 points for sharing).

Chris

Thank you Chris. Also rated your answer, as always concise and correct.

mknwv
Beginner

Let's try another route then ...... again, no Presence server available ......

I have a shared line ...... the BLF goes red when someone else picks up the shared line.  Is there anyway to see which telephone (user) picked up the shared line?

mknwv
Beginner

Let's try another route then ...... again, no Presence server available ......

I have a shared line ...... the BLF goes red when someone else picks up the shared line.  Is there anyway to see which telephone (user) picked up the shared line?

Chris Deren
Hall of Fame Master

Nope, not with CUCM (not sure about CME).

HTH,

Chris

Content for Community-Ad

Spotlight Awards 2021