I have an interesting one.
Hardware conferencing bridge with 3925
From any IP phone model I get the following:
IP phone to PSTN call G.711 connected
Conference another PSTN call connected G.711 (all audio works)
DSP in use on the bridge verified.
When one of the PSTN caller drops, one way audio occurs. (PSTN call can hear IP phone, but not vice versa).
Im stumped. Its the same config I have used just about everywhere for my loopback, Gig, SCCP CCM, binding the interfaces, etc. Something is happening when the voice call is handed off the DSP back to the router. You hear multiple disconnect beeps as the first PSTN caller drops.
Where should I be looking next? It seems fairly odd.
Thanks!
