I am having an issue getting a 7975 to register with CME 8.8... It worked fine when the phone was directly plugged into a switch module on the router, but now that I have the phone on my desk, and the 2911 is in the DC, the phone is in a registration loop...
If I run "debug voice register events\errors" I am consistantly getting the line "Contact doesn't match any pools" & "auth absent"...
Under the command "show voice register pool X" it show's that there hasn't been any registration attempts to the configured pool:
Pool Tag 3
Config:
Mac address is 108C.CF75.D8B5
Type is 7975
Number list 1 : DN 3
Proxy Ip address is 0.0.0.0
DTMF Relay is enabled, sip-notify
Call Waiting is enabled
DnD is disabled
Video is disabled
Camera is disabled
Busy trigger per button value is 0
Description is Hidehoo!
keep-conference is enabled
registration expires timer max is 3600 and min is 60
username 1112 password cisco
kpml signal is enabled
Lpcor Type is none
Transport type is udp
service-control mechanism is not supported
Registration method: per line
Privacy feature is not configured.
Privacy button is disabled
conference admin: no
conference add mode: all
conference drop mode: never
Reason for unregistered state:
No registration request since last reboot/unregister
paging-dn: config 0 [multicast] effective 0 [multicast]
Dialpeers created:
Statistics:
Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Attempts to register
Yet I have what appears to be all the requisite commands per my internet browsings:
voice service voip
allow-connections sip to sip
no supplementary-service sip handle-replaces
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface Loopback8
bind media source-interface Loopback8
registrar server
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
!
voice register global
mode cme
source-address 10.8.1.254 port 5060
timeouts interdigit 3
max-dn 100
max-pool 50
load 7975 SIP75.9-2-3S
authenticate register
authenticate realm all
timezone 8
tftp-path flash:
file text
create profile sync 0004336253345316
user-locale 1 US load CME-locale-en_US-English-8.8.2.3.tar
ntp-server 10.8.1.254 mode directedbroadcast
!
voice register dn 3
number 1112
name Yehaa! 1112
label Yehaa! 1112
!
voice register pool 3
id mac 108C.CF75.D8B5
type 7975
number 1 dn 3
dtmf-relay sip-notify
voice-class codec 1
username 1112 password cisco
description Hidehoo!
no vad
What am I doing wrong!?... I came across the Cisco site below that references something similar to what I am experiencing, yet the 7975 doesn't have the ability (that I can see atleast) like the 7960 has to change the username\password via the settings button:
https://supportforums.cisco.com/docs/DOC-3529
I did scp down the xml file for the phone from the router and the username\password combo are exactly the same as those define in the voice register pool 3...
Via the command "debug ccsip message" I am showing the following:
000679: Jul 12 17:39:54.371: //183/B1ED40A2806E/SIP/Msg/ccsipDisplayMsg:
Sent:
u SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 10.8.139.11:5060;branch=z9hG4bK1c1abccc
From: <sip:1112@10.8.1.254>;tag=108ccf75d8b5000316a4e8f8-a0ab50dc
To: <sip:1112@10.8.1.254>;tag=BC5974-1889
Date: Thu, 12 Jul 2012 23:39:54 GMT
Call-ID: 108ccf75-d8b50002-d0eb8ea8-581803ec@10.8.139.11
Server: Cisco-SIPGateway/IOS-15.2.3.T
CSeq: 101 REGISTER
WWW-Authenticate: Digest realm="all",nonce="78DAD3D10012D5BE",algorithm=MD5,qop="auth"
Content-Length: 0
I apprecate any help you can lend!
