POE Power problems

[Derek McCormick]

Hi,

I have recently installed an IPT solution for a customer. The core switch is a 6509-E. There are 240 POE ports

(WS-X6148A-GE-45AF) with CAC 3000 power supplies. I am using about 150 ports and now when I try to plug a new phone in, I get a system reached its power limit and the phone will not power up. If i unplug a different phone and plug in a new phone it will get power. The phones I am using are 7945. Has anyone come across this issue before.

Error Message is %ILPOWER-5-ILPOWER_NOPOWER_AVAIL:

Any help appreciated?

Derek

[sebastiandm]

I came across a similar issue with a 48port 3750 where the switch is only able to supply power for x amount of phones depending on the model of the phone. You could use the device power packs for the phones if you have them.

[nesharm2]

7945 requires 12w of power.

Try "show inlinepower" to see poweroutput on that switch

you can also Use the PoE Calculator tool for any such calculations

http://tools.cisco.com/cpc/PDS.cpc