I've read all the posts but haven't seen any clear signs of success with being able to get a VG202 to work with a postage machine.
Of course, fax machines work without any issues but it's just with the postage machine.
The postage machine we're using is a CentorMail. The devices seem to get connected but then the call is dropped.
The VG202 has 15.1 on it and CallManager is 8.6
Call flow: Postage machine - VG202(Port 0/0)- H323 - CUCM 8.6 - H323 - 3900 VG w/ PRI - ISDN provider
VG202 config
stcapp register capability 0/0 modem-passthrough
stcapp ccm-group 1
stcapp
!
stcapp supplementary-services
port 0/0
fallback-dn 1998
port 0/1
fallback-dn 1997
!
voice service voip
fax protocol pass-through g711ulaw
modem passthrough nse codec g711ulaw
!
voice-card 0
!
archive
log config
hidekeys
!
interface FastEthernet0/0
ip address 192.168.1.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 192.168.1.1
!
control-plane
!
voice-port 0/0
input gain 6
output attenuation 10
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
!
voice-port 0/1
timeouts ringing infinity
!
ccm-manager sccp local FastEthernet0/0
!
mgcp profile default
!
sccp local FastEthernet0/0
sccp ccm 10.2.40.12 identifier 1 priority 1 version 7.0
sccp ccm 10.90.50.12 identifier 2 priority 2 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
!
dial-peer voice 1 pots
service stcapp
port 0/0
!
dial-peer voice 2 pots
service stcapp
port 0/1
!
line con 0
exec-timeout 0 0
login local
line aux 0
login local
line vty 0 4
login local
transport input all
