11-16-2006 01:20 PM - edited 03-14-2019 06:51 PM
I have a range of 200 DID numbers. 2200 thru 2399 I am programming Two PRI's how do I tell the first PRI to accept a call from 22XX and /or 23XX and visa versa for the second?
11-16-2006 01:43 PM
Are you trying to send an outbound call from phone 22XX out PRI#1 AND 23xx OUT pri#2 ?
11-16-2006 02:01 PM
You cannot, inbound calls are controlled by the Telco, you need to let them know which PRI you want to associated the DID range with. Usually when you have 2 or more PRIs terminated at the same location you arrange Trunk group with the Telco where they send calls on both PRIs, depending which one has available ports.
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide