08-23-2011 09:33 AM - edited 03-16-2019 06:38 AM
Hi,
I have installed a new phone in 6911/6941 a CME with IOS C2900-universalk9-mz.SPA.151-4.M.bin. The devices do not work the conference button. The configuration of the meet-me does not work when you connect to the number of meet-me's so busy. Someone could help me, I am providing the setting.
Regards.
08-25-2011 11:24 PM
Hi Allan,
My name is Edson Pineiro, I understand that ad-hoc hardware conferencing is not working with your 6900 phones.
Please review the dspfarm profile and add the codec g711ulaw. The default codec used by Cisco ephone is g711ulaw.
I hope this helps!
If you have any further problem please do not hesitate to contact me.
Thank you
&
Regards
Edson Pineiro
08-26-2011 07:59 AM
Hi Edson,
I'll do this test if it does not I tell
Thank you
Allan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide