isdn map address .* plan isdn type unknown You can use plan as unknown or international.Actually telco should tell you what the plan type should beOther options available for the plan and type are:
router(config-if)#isdn map address .* ?
plan Set address numbering plan
router(config-if)#isdn map address .* plan ?
data Data plan
isdn ISDN plan
national National plan
privacy Private plan
reserved Reserved extension
reserved/10 Reserved value 10
reserved/11 Reserved value 11
reserved/12 Reserved value 12
reserved/13 Reserved value 13
reserved/14 Reserved value 14
reserved/2 Reserved
reserved/5 Reserved value 5
reserved/6 Reserved value 6
reserved/7 Reserved value 7
telex TELEX plan
unknown Unknown plan
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080444966.html#wp1025089
router(config-if)#isdn map address .* plan isdn ?
type Set address number type
router(config-if)#isdn map address .* plan isdn type ?
abbreviated Abbreviated type
international International type
national National type
network Network type
reserved Reserved type
reserved/5 Reserved value 5
subscriber Subscriber type
unknown Unknown type