IP Telephony and Phones

I've followed the directions in the Cisco Features and Services guide for CCM 5.1 to configure the auto attendant. When I try to log in, I get the error message "your administrator must associate the phone with a valid application user". I've made ...

Hi all,I am configuring a callmanager express 4.0 on a cisco 2821, from my configuration i have same dial-peer configured to reach to the pstn without clir, but i have also configured same dial-peer with clir restricted, i have user the caracter # to...

When you press the CFWDALL button and begin to enter an extension you get a message that says, " Your call can not be completed as dialed"What changes do I make in CCM 6.0 to allow users to forward calls?

Hello Everyone,I am trying to post my unresolved issue one more time before opening a case with Cisco TAC.When I dial 9 to go to PSTN network the seconday dial tone comes after dialing the next digit following the 9. For example, If I want to dial 96...

Hello. I've got a frustrating issue here. I just purchased a 7960 IP Phone and would like to perform a factory reset on the unit. I have followed the directions in the following article but my phone doesn't respond as it should. http://www.cisco.com/...

I have users that when they call Disconnected numbers, they are getting a fast busy instead of You have reached a non working number. The Disconnect code is Cause i = 0x8095 - Call rejected which translates that the call is being rejected for an unk...

i having isdn PRI line and we are using RAS5350 for ISDN link. so how can be possible to made my ip phone to mobile call ????

We are experiencing voice cutoff with SIP trunk. the scenario is, when making outbound call from an IP phone to PSTN phone, CCM delivers through SIP trunk to GW, when far side answers the call, the first or two words are always missing. However when...

Hi,Our Customer have to change all the DN at central site from 3 digits to 5 digits long... I don't want to delete everything and importing again through BAT. Is there a way to simply Update Line or to do it with AXL.Bulk Edit with Unity permit the c...

Hello all!I am deploying an IPCC Express implementation right now utilizing the IP Phone Agent. Its working perfectly but the client has a request to show some type of notification on state on the main phone screen (7941)...whether its a softkey tha...

Hi,We are running CCM Cluster 4.1(3) and Publisher is running on MCS7835 with 36GB Hard Disks.Presently we are running short of Disk space.I need to free some Disk space.I saw that Trace Folder( C:\Program Files\Cisco\Trace) taking lot of Disk space(...

Callmanager 5.1(2). Is there a way to hide the "personal directory" option from the Directories button on an IP phone?

Why is it that BAT does not allow to update Common Profiles in bulk ?CCM version 4.2.3Sr2bBat version 5.1.4

i hav call manager 4.0(1) and i need to support 7911,7931,7941,7961,7970 so i am asking if there any firmware patching for this ip phones to be supported on that call manager if not how can i upgrade my call manger to support this ip phones

Hi all, a 2811 GW is connected to an Alcatel OXE using a QSIG ECMA E1 connexion. 2811 GW use MGCP with CUCM6.0When an Alcatel phone try to configure a CFA to a cisco directory number, a call is set on the QSIG trunk (to check the availability of the ...