cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1144
Views
5
Helpful
1
Replies

Problem UC560 + SIP Phone + SIP Trunk

heuristicsol
Level 1
Level 1

Hello,

The scenario in which we find is the following:


SCENARIO:

A PBX UC560, has some phones using SIP and a SIP trunk.

1.- UC560 version

UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(2)T4, RELEASE SOFTWARE (fc1)

2.- SIP Phones UC560

show sip-ua register status

Line                             peer       expires(sec) registered P-Associ-URI

================================ ========== ============ ========== ============

0*                                 102        109          no                                         # SIP phone

104                                4          109          no                                         # SIP phone

150                             40004      133          no                                         # SIP phone

170                             40003      132          no                                         # SIP phone

171                             40002      91           no                                         # SIP phone

180                             40001      19           no                                        # SIP phone

2508205196                 -1         1366         yes                                         # SIP TRUNK

5...                             20001      109          no                                         # SIP phone

520                             20075      109          no                                        # SIP phone

3.- Troncal SIP

show sip-ua register status

Line                             peer       expires(sec) registered P-Associ-URI

================================ ========== ============ ========== ============

0*                                 102        109          no                                         # SIP phone

104                                4          109          no                                         # SIP phone

150                             40004      133          no                                         # SIP phone

170                             40003      132          no                                         # SIP phone

171                             40002      91           no                                         # SIP phone

180                             40001      19           no                                        # SIP phone

2508205196                 -1         1366         yes                                         # SIP TRUNK

5...                             20001      109          no                                         # SIP phone

520                             20075      109          no                                        # SIP phone

PROBLEMA

All SIP phones try to register with the SIP provider. The SIP trunk provider when it receives more than 10 attempts failed records of UC560 IP bans. The unit is operating as a SIP proxy and forward REGISTER requests from SIP phones to SIP trunk, which as soon as you to realize more than 10 attempts the UC560 IP is in the blacklist and can not make calls.


Below are some examples of debugging,

# debug ccsip messages

Sent:
REGISTER sip:sip.netelip.com:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK82FC76C
From: <sip:520@sip.netelip.com>;tag=134DA8A8-1070
To: <sip:520@sip.netelip.com>
Date: Mon, 18 Feb 2013 14:04:52 GMT
Call-ID: E797F5B-761911E2-8006B1F0-399A5411
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 1
Timestamp: 1361196292
CSeq: 3591 REGISTER
Contact: <sip:520@192.168.1.9:5060>
Expires:  3600
Supported: path
Content-Length: 0

Sent:

REGISTER sip:sip.netelip.com:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK82FD226A
From: <sip:0*@sip.netelip.com>;tag=134DA8B0-4FFB
To: <sip:0*@sip.netelip.com>
Date: Mon, 18 Feb 2013 14:04:52 GMT
Call-ID: D9056E8-761911E2-8002B1F0-399A5411
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 1
Timestamp: 1361196292
CSeq: 3589 REGISTER
Contact: <sip:0*@192.168.1.9:5060>
Expires:  3600
Supported: path
Content-Length: 0

Sent:

REGISTER sip:sip.netelip.com:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK82FE5AA
From: <sip:104@sip.netelip.com>;tag=134DA8EC-1D52
To: <sip:104@sip.netelip.com>
Date: Mon, 18 Feb 2013 14:04:52 GMT
Call-ID: DAF79A8-761911E2-8003B1F0-399A5411
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 1
Timestamp: 1361196292
CSeq: 3591 REGISTER
Contact: <sip:104@192.168.1.9:5060>
Expires:  3600
Supported: path
Content-Length: 0

Previous attempts result in authentication failure and the IP ban UC560.

Received: 

SIP/2.0 403 Forbidden (Bad auth)
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK82FFB0;received=217.125.71.164;rport=41626
From: <sip:520@sip.netelip.com>;tag=134DA8A8-1070
To: <sip:520@sip.netelip.com>;tag=as0787db9c
Call-ID: E797F5B-761911E2-8006B1F0-399A5411
CSeq: 3592 REGISTER
Server: Netelip
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0

Received: 
SIP/2.0 403 Forbidden (Bad auth)
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK8300198C;received=217.125.71.164;rport=41626
From: <sip:0*@sip.netelip.com>;tag=134DA8B0-4FFB
To: <sip:0*@sip.netelip.com>;tag=as1cb35a3c
Call-ID: D9056E8-761911E2-8002B1F0-399A5411
CSeq: 3590 REGISTER
Server: Netelip
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0


Received: 
SIP/2.0 403 Forbidden (Bad auth)
Via: SIP/2.0/UDP 192.168.1.9:5060;branch=z9hG4bK83012088;received=217.125.71.164;rport=41626
From: <sip:104@sip.netelip.com>;tag=134DA8EC-1D52
To: <sip:104@sip.netelip.com>;tag=as139a9b22
Call-ID: DAF79A8-761911E2-8003B1F0-399A5411
CSeq: 3592 REGISTER
Server: Netelip
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0

QUESTION


How can we prevent you to realize SIP phone registration attempts against SIP trunk?, And thus prevent the IP provider's IP ban the user the UC560.

                                        # Telefono SIP
1 Accepted Solution

Accepted Solutions

Hi

This is very normal

Add the no-reg primary  into ALL the ephone-dns

Also you have to do the same for the rest

Dial peers , etc

Example:

ephone-dn  1  dual-line

number 0900 no-reg primary

dial-peer voice 20 pots

no sip-register

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""

View solution in original post

1 Reply 1

Hi

This is very normal

Add the no-reg primary  into ALL the ephone-dns

Also you have to do the same for the rest

Dial peers , etc

Example:

ephone-dn  1  dual-line

number 0900 no-reg primary

dial-peer voice 20 pots

no sip-register

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""