Hi All,
I have a problem on FXO card. And I think that it is problem of configuration
I call numbers of line connected in FXO card, and I take down the call before the IP Phone answers me, the IP Phone continues sounded without stop, (approximately 120s)
Here configuration of chart FXO:
voice-port 0/1/1
no battery-reversal
output attenuation -6
cptone FR
timeouts interdigit 2
timeouts call-disconnect 0
timeouts wait-release 1
connection plar 130
impedance complex2
my version of CME is:
UC520#sh telephony-service
CONFIG (Version=7.1)
=====================
Version 7.1
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
ip source-address 10.1.1.1 port 2000
ip qos dscp:
Thank you for your Help
