02-08-2011 07:29 AM - edited 03-16-2019 03:19 AM
Hi All,
I followed this forum post to configure personalized logos for 7911G IPphones
https://supportforums.cisco.com/thread/343395
I did all these steps
But after that I still can ´t see the logos on device, I only can see the cisco default.
One doubt that I have : I noticed that I have two List.xml file after I push my personalized file, but they are in diferents directories, do I need delete one and just leave only one ?
My files are attached on this post, I not sure if doing wrong with some stardant with png and xml files.
Can some body help me with this issue ?
thanks
AB
02-08-2011 09:35 AM
Hi,
make sure you are using the standard file format recommended. and restart the ip phones ..
02-08-2011 10:09 AM
Hi Murthy,
I´m using follow specs for the files :
For Ip phones 7911G
image file 95x34
tumbnail file 23x8 with name file as TN- in front
and the List.xml is
-
URL="TFTP:Desktops/95x34x1/kerog.png" />
URL="TFTP:Desktops/95x34x1/kerop.png" />
Some thing that i forgot' ?
AB
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide