QOS over 3845 ISR

[paulhardy]

I have the following scenario

LAN -- 2651--WAN--3845--LAN

I would like to set some QOS policing ont he 3845 at the reote site for traffic coming from remote site. I have tried to set a nested policy-map with a police and have recieved an error say not policing not supported. Is there any way to police the link to 10Mb/s and enable LLQ for voice.

[irisrios]

To configure Low Latency Queuing (LLQ), perform these steps:

Create a class map for Voice over IP (VoIP) traffic, and define match criteria.

Create a class map for VoIP signaling, and define match criteria (optional).

Create a policy map, and associate it to the VoIP class maps.

Enable LLQ by applying the policy map to the outbound WAN interface.

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_q_and_a_item09186a00800cdfab.shtml

http://www.cisco.com/en/US/docs/ios/12_1/qos/configuration/guide/qcdvoice.html