"Hunt group" for Park Slots

[Safar Safarov]

Hello,

I have configured five park slots on my CME, and everything works fine.

Now I need to transfer all incoming call to Park slots and a system that will check an availability of a park slot.

like:

Incoming call from FXS

If Park Slot #1 available, then place the call in Park Slot#1,

If Park Slot #1 is busy by other call, then place the call in Park Slot #2

........

If Park Slot#5 is busy by other call, then place the call in Park Slot #6

I tried to do that by adding Park slots extensions to a Sequential Hunt Group, but it didn't work.

Could please share a config example?

Thank you.

[Safar Safarov]

Have found how to do that.

Park Slots can be added to "voice hunt-group" but not to "ephone-hunt" so changing config from

ephone-hunt 1 sequential
pilot 297
list 212, 222, 208
final 200
preference 0 secondary 1
timeout 10, 10, 10
no-reg pilot

to

voice hunt-group 1 sequential
pilot 297
list 212, 222, 208
final 200
preference 0 secondary 1
timeout 10, 10, 10
no-reg pilot

did the work.