Hi,
I m using an IPICS server 2.1 with the following equipement :
1-Router 2800 with VIC2-2E/M card ( connected to the Radio base station)
2- Cisco ipphone 7961
I have configured the VIC2-2E/M port with the following configuration :
voice-port 0/3/0
voice-class permanent 1
auto-cut-through
operation 4-wire
type 3
input gain 10
output attenuation 10
no echo-cancel enable
no comfort-noise
timeouts call-disconnect 3
timeouts wait-release 3
timing hookflash-in 0
connection trunk 101
description VAD Operated Voice Port
the problem is that i can receive in the ipphone the PTT call from the radio , but i cant do it from ipphone.
Could someone help me to troubleshoot
Many thanks
hicham
!
