Hi Everybody,
Here is the environment
CUCM 10.5 - PUB 10.10.242.51
CUCM 10.5 - SUB 10.10.242.52
I am going to re-host the CUCM pub, the following is my procedure
1. DRS backup CUCM PUB (on OLD UCS)
2. DRS restore CUCM PUB (on NEW UCS) (on a separated network)
3. Remove the CUCM-PUB(OLD) from the network
4. Plug the CUCM-PUB(NEW) to the network
when type the "utils dbreplication runtimestate
it shows Pub is DB Active-Dropped
admin:utils dbreplication runtimestate
Server Time: Mon Jun 8 17:25:59 HKT 2015
Cluster Replication State: Only available on the PUB
DB Version: ccm10_5_1_10000_7
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from CUCM2015b (2 Servers):
PING DB/RPC/ REPL. Replication REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) DbMon? QUEUE Group ID (RTMT) & DB Status
----------- ---------- ------ ------- ----- ----------- ------------------
CUCM2015b 10.10.242.52 0.061 Y/Y/Y 0 (g_3) (2) Setup Completed
cucm2015 10.10.242.51 0.100 Y/Y/Y 14926 (g_2) (-) DB Active-Dropped
then I tried
1. utils dbreplication stop (CUCM-SUB)
2. utils dbreplication stop (CUCM-PUB)
3. utils dbreplication reset all (CUCM-PUB)
but it shows Replication Not Setup
admin:utils dbreplication runtimestate
Server Time: Mon Jun 8 18:34:56 HKT 2015
Cluster Replication State: dbmonpreflightcheck file is not found.
DB Version: ccm10_5_1_10000_7
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from CUCM2015b (2 Servers):
PING DB/RPC/ REPL. Replication REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) DbMon? QUEUE Group ID (RTMT) & DB Status
----------- ---------- ------ ------- ----- ----------- ------------------
CUCM2015b 10.10.242.52 0.017 Y/Y/Y -- (-) (-) Replication Not Setup
cucm2015 10.10.242.51 0.096 Y/Y/Y -- (-) (-) Replication Not Setup
Anybody knows what mistake I have made? how can I make the DB replication to normal state?
Thanks in advance
Sam
