reg partitions

[karthik ratna]

hi,

2 phones in same lan call internally it will check css or it directly check matiching DN ?

bcoz phone1 : 500100 having partition : pt-global-line  and  phone2 : 500101  partition : pt-global-line

If phone1 dials 101 call gets to phone2 , translation pattern : 1XX partition : pt-global-tr  called party mask : 100XXX

For css of the phones : css-global-line , which dont have partition : pt-global-tr ( which used for translation pattern)  , i wonder how call is passing to phone2 as it doesnot have partiton pt-global-tr

now my question is how call is maturing

Kindly help me on this

Thanks in advance

karthik 

[acampbell]

Hi,

Look at the dependancy records for Partition

pt-global-line

Does this have a 3 to 6 digit translation associated probably starting like 1XX

Which is translating 1xx to 5001xx

Regards

Alex

[karthik ratna]

hi,

i have verified dependeny records nothing matches with translation pattern , i have verified all translation pattern , no partition involves in css which is placed in phone1 but how call was maturing , as it needs to match the partition of translation pattern for taking effect

please help me on this

thanks

karthik

[Jaime Valencia · Accepted solution]

You ALWAYS check CSS no matter who you're calling, you reach the other end via the TP, he's the middle man for the call as you don't dial 500101, you dial 101.

I recommend you to read the dial plan chapter from the SRND to fully understand CUCMs routing logic

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[acampbell · Accepted solution]

karthik

The phone will look up the CSS on the line 1st

Then the CSS on the actual phone next.

Their must be a 3 to 6 digit tranlation somewhere or you would need to dail the full 6 digits between the lines.

Regards

Alex

[Jaime Valencia]

Try with DNA, it will tell you what you're matching

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[karthik ratna]

Hi alex,

Thanks i was missing small point here