cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
514
Views
0
Helpful
1
Replies
Highlighted
Rising star

Roles for Users in via LDAP

Hello folks,

I've got a customer that wants to give "Standard CCM End User" rights to their 7,500 users.

These users are bought in via LDAP and although I can set all of the rights individually, doing that for 7,500 users is a killer!  I also know that I can put users in against the Role, but that's still only letting me do it 250 users at a time.

Is there a way of adding in users from LDAP and giving them a default profile?

LH

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Cisco Employee

Unfortunately there is no way to give users a default role when importing them.

This is asked quite frequently so i'd suggest you to reach your AM and check with him if you can submit a PER on this.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

1 REPLY 1
Highlighted
Hall of Fame Cisco Employee

Unfortunately there is no way to give users a default role when importing them.

This is asked quite frequently so i'd suggest you to reach your AM and check with him if you can submit a PER on this.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Content for Community-Ad