Hi everyone,
I am configuring a 4331 with a NIM-2MFT-T1/E1 but I can´t configure the R2 signalling, the command for r2-digital is not in the router.
Router_Voice(config)#controller e1 0/1/0
Router_Voice(config-controller)#ds0-group 0 timeslots 1-15 type r2-digital
^
% Invalid input detected at '^' marker.
Router_Voice(config-controller)#ds0-group 0 timeslots 1-15 type ?
e&m-delay-dial E & M Delay Dial
e&m-immediate-start E & M Immediate Start
e&m-melcas-delay MEL CAS (CEPT) E & M Delay Start
e&m-melcas-immed MEL CAS (CEPT) E & M Immediate Start
e&m-melcas-wink MEL CAS (CEPT) E & M Wink Start
e&m-wink-start E & M Wink Start
fxo-ground-start FXO Ground Start
fxo-loop-start FXO Loop Start
fxo-melcas MEL CAS (Mercury) FXO
fxs-ground-start FXS Ground Start
fxs-loop-start FXS Loop Start
fxs-melcas MEL CAS (Mercury) FXS
Can you help me please?
Here are the show version and show run
Router_Voice#sh ver
Cisco IOS XE Software, Version 03.13.04.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S4, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Mon 05-Oct-15 11:24 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router_Voice uptime is 2 hours, 16 minutes
Uptime for this control processor is 2 hours, 17 minutes
System returned to ROM by reload
System image file is "bootflash:/isr4300-universalk9.03.13.04.S.154-3.S4-ext.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx None None None
uc uck9 Permanent uck9
security None None None
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4331/K9 (1RU) processor with 1687137K/6147K bytes of memory.
Processor board ID FLM2101W1BJ
3 Gigabit Ethernet interfaces
2 Channelized E1/PRI ports
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3207167K bytes of flash memory at bootflash:.
Configuration register is 0x2102
Router_Voice#sh run
Building configuration...
Current configuration : 2489 bytes
! Last configuration change at 19:38:14 UTC Mon Jun 5 2017
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
!
hostname Router_Voice
!
boot-start-marker
boot-end-marker
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
card type e1 0 1
enable secret 5 $1$NJEv
!
aaa new-model
!
aaa session-id common
!
ip domain name Mer.com
!
subscriber templating
multilink bundle-name authenticated
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12 advertise-only
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
call start slow
sip
header-passing
registrar server expires max 3600 min 3600
!
voice-card 0/1
dsp services dspfarm
no watchdog
!
voice-card 0/4
dsp services dspfarm
no watchdog
!
license udi pid ISR4331/K9 sn FDO205124SC
!
username Cisco secret Cisco
!
redundancy
mode none
!
controller E1 0/1/0
framing no-crc4
!
controller E1 0/1/1
framing no-crc4
!
interface GigabitEthernet0/0/0
no ip address
speed 1000
no negotiation auto
!
interface GigabitEthernet0/0/0.90
encapsulation dot1Q 90
ip address 172.X.X.X 255.255.255.0
no cdp enable
!
interface GigabitEthernet0/0/1
no ip address
shutdown
negotiation auto
!
interface GigabitEthernet0/0/2
no ip address
shutdown
negotiation auto
!
interface Service-Engine0/1/0
!
interface Service-Engine0/4/0
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
no ip address
shutdown
negotiation auto
!
ip forward-protocol nd
no ip http server
no ip http secure-server
ip tftp source-interface GigabitEthernet0
ip route 0.0.0.0 0.0.0.0 172.19.90.1
ip ssh time-out 60
ip ssh authentication-retries 2
ip ssh version 2
!
control-plane
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
transport input ssh
!
network-clock synchronization automatic
!
end
