03-11-2015 12:02 PM - edited 03-17-2019 02:17 AM
Is there a way in RTMT to see the active MGCP PRI B channels for a specific span? It appears the only real time graph is a total count of all the active B channels registered to the cluster consisting of multiple PRIs, nothing span specific. Any pointers or alternate ways of doing this would be greatly appreciated. I have pulled CDR records and translated into line graph averages, but would like to be able to see a specific PRI line graph in real time instead of doing a constant "sh voice call summary" over and over on the gateway. This is my 1st time to post on the Cisco Support forums, be gentle. :)
Thanks,
Paul
Solved! Go to Solution.
03-11-2015 02:57 PM
Hi pjsooner7,
welcome to the Community.
Try this:
In RTMT > Performance > StandAlone Cluster > <CUCM's IP Addr> > Cisco MGCP Gateways: - PRIChannelActive - PRISpanInService
Hope this helps.
03-11-2015 02:57 PM
Hi pjsooner7,
welcome to the Community.
Try this:
In RTMT > Performance > StandAlone Cluster > <CUCM's IP Addr> > Cisco MGCP Gateways: - PRIChannelActive - PRISpanInService
Hope this helps.
03-11-2015 03:16 PM
Well that was easy enough. Thank you Marcelo!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide